نتایج جستجو برای: steel beam and girder
تعداد نتایج: 16885546 فیلتر نتایج به سال:
To the 36 meters crane girder with trapezoidal variable cross-section in a steel plant, finite element model is established reasonably according its actual size. The calculation of crane girder structure was introduced by using the finite element analysis software ANSYS. The local stress state of the cross-section is investigated and the stress concentration position of variable cross-section i...
چکیده ندارد.
Slab-girder structures composed of steel girder and reinforced concrete slab are widely used in buildings and bridges in the world. Their advantages are largely based on the composite action through the shear connection between slab and girder. In order to assess the integrity of this kind of structures, numerous vibration-based damage identification methods have been proposed. In this study, a...
INTRODUCTION The lower ratio of dead load to live load than existing multi-girder bridges, wide girder spacing and simplified structural system of the twin-girder bridges can give rise to change of dynamic characteristics of the bridges. Wider girder spacing and changing of dynamic features will also effect on a vibration serviceability of the bridges. What is worse, according to running vehicl...
در سالیان اخیر حرکت جدیدی در طراحی سازه ها، به سمت استفاده از معیار طراحی حدی آغاز شده است. در این معیار عملکرد سازه در حالت های مختلف حدی متناسب با آن سازه مورد بررسی قرار می-گیرد. حالت حد نهایی یا استحکام نهایی از جمله حالت های حدی مهمی است که برای سازه های فولادی در نظر گرفته می شود. در کشتی به عنوان یک سازه فولادی، اولین گام در محاسبات سازه ای، محاسبه استحکام شاه تیر آن می باشد که خود تاب...
روش مقاومت مستقیم (dsm)، اولین¬بار، به صورت یک دسته معادله¬، برای اعضای فولادی سرد¬ساخت در مشخصات آئین¬نامه aisi، ارائه شد که بعد از انجام تحقیقات گسترده به عنوان روشی طراحی برای اعضای فولادی سرد¬ساخت توسعه یافته است که از آن می¬توان بعنوان یک روش طراحی برای اعضای فولادی سرد¬ساخت فشاری، خمشی، برشی، تیر¬ستون¬ها و سوراخ¬دار استفاده کرد. در سالهای اخیر، سعی شده است که از dsm برای طراحی اعضای فولاد...
As a service to the bridge design profession, Bethlehem Steel has conducted hundreds of studies of steel plate girder bridges using its Preliminary Bridge Girder Optimization Program. The program is unique because it optimizes plate girder designs on the basis of least cost, not least weight. An evaluation of many study results leads to a number of guidelines which are offered in this paper. Wh...
Abstract: Based on the characteristics of box girder with corrugated steel webs, the existing prestressing force, the effect of shear deformation of composite girder on the deflection, “folding effect” in longitudinal direction of corrugate steel webs and the arrangement of external tendons were considered comprehensively. With the experiment results of five literatures integrated, N/fcA (the a...
The research described in this paper focuses on the application of modal strain techniques on a multi-girder bridge superstructure with the objectives of identifying the presence of damage and detecting false damage diagnosis for such structures. The case study is a one-third scale model of a slab-on-girder composite bridge superstructure, comprised of a steel-free concrete deck with FRP rebars...
The streamline flat steel box girder is broadly used in long span cablesupported bridges all over the world. As one of the most important part of the bridges, its stress level and distribution under various dynamic loads are especially concerned. However, it is difficult to obtain the accurate stress of the steel box girder by common finite element (FE) calculation. The Runyang Suspension Bridg...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید